L&L KILN SERIES:
Davinci Square & Rectangular Kilns
KILN:

XB2336-D Electric Kiln

Large Rectangular Sectional Kiln

KILN:

XB2336-D Electric Kiln

Large Rectangular Sectional Kiln

$8,175
LEAD TIME: 20 to 24 Weeks
WHERE TO BUY
PDF Brochure General Dimension Diagram

Model XB2336-D Square Automatic DaVinci Kiln with a Multi-Program Three-Zoned DynaTrol control. Models below 80 amps use a side mounted Jupiter panel; high amp models use a floor-standing control panel. Sectional and modular construction allows future expansion aided by the unique adjustable spring-loaded counterbalanced welded and powder-coated hinge system. Stand is a welded steel frame with a sheet of aluminized steel between the bottom brick and the stand. Sides are made of specially machined arched bricks for strength. Kiln comes with hard ceramic element holders, thermocouple protection tubes, and solid peephole plugs. 22" Wide x 22" Deep x 36" High, (10.8 cubic feet). Extra power elements for faster heat up.3" K23 brick. Direct power connection. C-MET-us listed in the USA & Canada. Cone 10 all voltages.

DaVinci Kilns include FREE Zone Control.

Furniture Kit for X2336 DaVinci
  • Part Number:
    H-X-K336/00
  • Includes: Eight 20" X 10" Rectangular Shelves (3/4" thick), Twelve Each 1/2", 1", 2", 4", 6", and 8" Square Posts, and One Pair Heat Resistant Gloves
  • Price:
    $1,000.00
  • Insulation:
    3" K23 Firebrick
  • Sections:
    Four 9" high sections
  • Inside Dimensions:
    22.00"
    Wide x
    22.00"
    Deep x
    36.00"
    High (55.88 cm Wide x 55.88 cm Deep x 91.44 cm High)
  • Outside Dimensions:
    43.00"
    Wide x
    41.00"
    Deep x
    96.00"
    High (109.22 cm Wide x 104.14 cm Deep x 243.84 cm High)
  • Weight:
    700
    lbs (318 kg)
SKU Model Number Watts Volts Phase Fuse Size
K-X-233B/21 XB2336-D-208-1Ph 17,872 208 Single Phase 100 Amp
  • Additional Information
  • Amps: 85.9
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 1 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-X-233B/22 XB2336-D-208-3Ph 17,872 208 Three Phase (Delta) 80 Amp
  • Additional Information
  • Amps: 56.8
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 3 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-X-233B/31 XB2336-D-240-1Ph 17,872 240 Single Phase 100 Amp
  • Additional Information
  • Amps: 74.5
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 1 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-X-233B/32 XB2336-D-240-3Ph 17,872 240 Three Phase (Delta) 70 Amp
  • Additional Information
  • Amps: 49.3
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 4 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-X-233B/62 XB2336-D-480-3Ph 17,872 460-480 Three Phase (Delta) 30 Amp
  • Additional Information
  • Amps: 21.5
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 10 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Three Elements in Wye with 277 Volts per element
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-X-233N/62 XB2336-D-480-3Ph-QD 17,872 460-480 Three Phase (Delta) 40 Amp
  • Additional Information
  • Amps: 24.6
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 8 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Two 240V Quad Elements in Series
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-X-233B/41 XB2336-D-220-1Ph 17,872 220-230 Single Phase 100 Amp
  • Additional Information
  • Amps: 81.2
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 1 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-X-233B/52 XB2336-D-380-3PY 17,872 380 Three Phase (Wye) 60 Amp
  • Additional Information
  • Amps: 40.6
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 6 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-X-233B/82 XB2336-D-400-3PY 17,872 400 Three Phase (Wye) 50 Amp
  • Additional Information
  • Amps: 38.9
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 6 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-X-233B/72 XB2336-D-415-3PY 17,872 415 Three Phase (Wye) 50 Amp
  • Additional Information
  • Amps: 37.2
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 6 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):

Control

DynaTrol Multi-Program Zone Control
DynaTrol with 4 Easy-Fire programs (Slow Bisque, Fast Bisque, Slow Glaze, Fast Glaze), 6 custom programs, PreHeat, Delay, Program, Segment Review, and Diagnostics. Zone control included on most kilns. Also see Genesis Touch Screen Option with Phone App for Remote Monitoring.
Automatic Zone Control
No need to pay extra for this important feature! Zone control on an electric kiln gives you the utmost in controllable temperature uniformity. The kiln control separately measures temperatures in the bottom, middle and top of the ceramic kiln and automatically adjusts the heat output of three kiln zones during the entire glaze or bisque firing.
Industrial Wiring (DaVinci & Easy-Load)
DaVinci Panels are wired to industrial standards with good clean wire layout.
Floor-Standing Panel Away from Kiln (DaVinci)
The control panel is mounted on a stand away form the kiln.
Protected Thermocouples
Ceramic protection tubes protect the end of the thermocouple.
Heavy-Duty Type K Thermocouples
Thick 8 gauge thermocouples last a long time. Special Limit of Error to ANSI MC96.1 specifications is used.
Mercury Free Contactors
Power Relays are mercury-free to comply with increasing regulation and concern about mercury. Solid State Contactors are available as an option on most L&L Kilns.
On-Off Switch and Panel Fuse
All L&L Kilns come with an on-off switch and panel mounted control fuse. We do not rely on the kiln control to keep the kiln off.

Durability

Hard Ceramic Element Holders Make L&L Kilns More Durable
Durability, Repairability, Better Heat Transfer. The smooth, hard surface of the inside ceramic channel allows the elements to expand and contract freely. No pins! The dense ceramic holders extend element life because they do not insulate the hot elements from the kiln interior.
Strong Arched Sides with Extra Airspace (DaVinci)
Arched sides on DaVinci kilns are very strong and promote good air circulation
Steel Frame Supports Lid (DaVinci)
A unique welded rigid frame supports the entire lid on a DaVinci kiln.
Welded Angle Iron Stand (DaVinci)
Welded heavy-duty stand supports heavy loads. Alumized top sheet reflects heat.
Molded Ceramic Element Connections
Industrial grade ceramic terminal blocks make changing elements easy. All contact between elements and wire lugs is over a wide surface of heavily torqued stainless steel washers. Wires are not crimped to element ends as in some other brands. This means you can change elements yourself without buying an expensive tool or hiring a kiln repair person.
Solid Wide-View Peephole Plugs
Solid large non-tapered peepholes allow a wider view into the kiln. The peephole plugs are made from solid ceramic and are not as fragile as hollow type plugs used on competitor's kilns.
Proprietary Reflective Coating Hardens & Seals Brick
Special brick coating hardens and seals brick for durability and cleaner operation.
Corrosion Resistant Case
Corrosion resistant materials and methods result in a long-lasting kiln.
Extra Case Clamps
Three case clamps per 9" high kiln section are redundant safety for your L&L kiln.

Performance

Thermal Ceramics Firebrick
K23 firebrick combines good insulation with strength

Ease of Use

Spring-Loaded Lid For Easy Opening and Gentle Closing of DaVinci
Even the largest DaVinci lids can easily be lifted by one person.

Serviceability

Sectional Kiln Construction for DaVinci Kilns
Sectional kiln construction make DaVinci kilns easy to move, set up and disassemble for maintenance. Kiln Sections all plug into a separate control panel making the kiln easy to take apart and reconfigure.
Reversible Bottoms
The bottom can be easily reversed in case of a firing mishap.

Support

Three-Year Limited Warranty (Standard)
Most L&L Kilns have a three-year limited warranty.
Superior Technical Support
The combined experience at L&L Kilns in kilns, ceramics, electrical engineering and process engineering is unsurpassed. We work as a team to help you get you answers and help.
Visual Detailed Instruction Manual
The combined experience at L&L Kilns in kilns, ceramics, electrical engineering and process engineering is unsurpassed. We provide a visual parts list with photographs, part numbers, prices and helpful information to reduce confusion when ordering parts. We also include well-vetted information and wisdom from our industry partners to ensure our customers have access to all the basic information necessary to be successful from the first firing.

Safety

Listed to UL499 Standard by MET
Most L&L kilns are MET listed to UL499 standards. Listed kilns include Easy-Fire Pottery Kilns, Easy-Fire-XT Square Pottery Kilns, eQad-Pro Professional Kilns, eFL Front-Loading Kilns, Jupiter Sectional Kilns, DaVinci Square & Rectangular Production Kilns, School-Master School Kilns, Fuego Home Craft Kilns, Doll-Test Kilns, and Liberty-Belle Craft Kilns. Easy-Load Production Front-Loading kilns are MET-Us Listed for US only.

Elements

Quad Element Option
The combination of 1/2" diameter element coils, the doubled surface area of the Quad element design, and superior heat transfer of L&L's patented ceramic element holders, make this the best element system in the world today.
APM Sintered Powder Metal Elements
APM elements increase element life in difficult applications

Thermocouples

Type S Platinum Thermocouples
Type S Platinum Thermocouples are recommended for high fire applications. NOTE: Price of upgrade is per each thermocouple.
Pyrocil Metal Sheathed Industrial Thermocouples
Pyrocil thermocouples are sensitive but limited to about 2200°F but offer greater sensitivity to temperature change and so may be appropriate in applications below 2200°F that require sensitivity. NOTE: Price of upgrade is per each thermocouple.

Vents

Vent-Sure Downdraft Kiln Vent System
A Critical component in the longevity of your kiln!The Vent-Sure automatic kiln vent helps prevent corrosion on the inside and outside of your kiln.
Vent Control Programmed on DynaTrol & Genesis
The Vent Control allows you to automatically control the operation of the Vent-Sure kiln vent with one of the outputs from the DynaTrol (or Genesis).

Kiln Furniture

Furniture Kits
Kiln furniture kits are the recommended set of ceramic shelves, posts and kiln wash that go with each kiln model. These are for loading the work in the kiln.
Safety Gloves
These safety gloves are perfect for handling hot work when unloading a kiln.

Controls

Genesis Touch Screen Control
The new Genesis control from Bartlett includes a touch screen interface and WIFI connectivity added to the proven software of the DynaTrol. A phone app allows you to monitor your kiln remotely.
Solid State Relays
Solid State Relays are quiet and result in longer element life because the switching time is so fast the elements don’t heat and cool as much the way the will with regular mechanical contactors. The whole system includes heat sinks, special fast acting fuses, cooling fan and extra safety relays.
Electronic High Limit Back Up Control
Electronic High Limit Back Up Control acts as an upper limit back up to the main control. Back up contactors are also available.

Power

480 Volt Option
L&L's 480 volt option can include a NEMA 1 control panel
120 Volt Power Supply & Electrical Noise Filter For Automatic Kilns
This option helps protect your control from electrical noise
Powered Bottoms For DaVinci Kilns
Powered bottoms increase power and can aid uniformity in large kilns

Miscellaneous

Unpowered 4-1/2" High DaVinci Sections
Unpowered rings can extend the height of our DaVinci kilns.
Seismic Kiln Rack and Brace
This special Seismic Kiln Rack and Brace is designed to prevent a kiln from falling over during an earthquake.
Crating Charges and Export Options
Export crates, ISPM-15 Skids for export, and special pallet designs for unloading Easy-fire kilns without a forklift.
  • Kiln:
    Skid #1: 48 IN Wide X 40 IN Deep X 39 IN High | Skid #2: 48 IN Wide X 40 IN Deep X 62 IN High
    (
    Skid #1: 122 CM Wide X 102 CM Deep X 100 CM High | Skid #2: 122 CM Wide X 102 CM Deep X 158 CM High
    )
  • Ship Weight:
    800
    lbs (363 kg)
  • Kiln with Furniture Kit:
    Skid #1: 48 IN Wide X 40 IN Deep X 52 IN High | Skid #2: 48 IN Wide X 40 IN Deep X 62 IN High
    (
    Skid #1: 122 CM Wide X 102 CM Deep X 133 CM High | Skid #2: 122 CM Wide X 102 CM Deep X 158 CM High
    )
  • Ship Weight:
    900
    lbs (408 kg)
  • Kiln with Vent:
    Skid #1: 48 IN Wide X 40 IN Deep X 52 IN High | Skid #2: 48 IN Wide X 40 IN Deep X 62 IN High
    (
    Skid #1: 122 CM Wide X 102 CM Deep X 133 CM High | Skid #2: 122 CM Wide X 102 CM Deep X 158 CM High
    )
  • Ship Weight:
    815
    lbs (370 kg)
  • Kiln with Vent and Furniture Kit:
    Skid #1: 48 IN Wide X 40 IN Deep X 52 IN High | Skid #2: 48 IN Wide X 40 IN Deep X 62 IN High
    (
    Skid #1: 122 CM Wide X 102 CM Deep X 133 CM High | Skid #2: 122 CM Wide X 102 CM Deep X 158 CM High
    )
  • Ship Weight:
    915
    lbs (415 kg)
  • Packaging:
    Two Wooden Crates

Turntable View

XB2336-D Electric Kiln
Compare L&L Kilns
eFL2626 Front-Loading Kiln eQ2827-3 Production Kiln EL2427-H Front-Loading Kiln e28T-3 Pottery Kiln
Kiln eFL2626 Front-Loading Kiln eQ2827-3 Production Kiln EL2427-H Front-Loading Kiln e28T-3 Pottery Kiln
Description

Studio Front-Loader

Production Pottery Kiln

Industrial Grade Front-Loader

Flagship Multi-Purpose Kiln
Price $8,475.00 $5,800.00 $13,900.00 $4,525.00
Type Front-Loading Kilns Polygonal Kilns Front-Loading Kilns Polygonal Kilns
Volume 10.2 cubic feet 10.2 cubic feet 9.0 cubic feet 10.2 cubic feet
Temperature Cone 10, 2350F, 1290C Cone 10, 2350F, 1290C Cone 10, 2350F, 1290C Cone 5, 2170F, 1190C