KILN:

XB2318-D Electric Kiln

Large Rectangular Sectional Kiln

KILN:

XB2318-D Electric Kiln

Large Rectangular Sectional Kiln

Square & Rectangular Kilns
Medium
(5 cubic feet)
DynaTrol Zone Control
Cone 10, 2350F, 1290C

$5,425

LEAD TIME: 10 to 12 Weeks

BUY NOW

PDF Brochure General Dimension Diagram

Model XB2318-D Square Automatic DaVinci Kiln with a Multi-Program Two-Zoned DynaTrol control. The control panel is a Jupiter panel that mounts the the kiln on stand-offs and plugs into the various kiln sections. Sectional and modular construction allows future expansion aided by the unique adjustable spring-loaded counterbalanced welded and powder-coated hinge system. Sides are made of specially machined arched bricks for strength. Stand is a welded steel frame with a sheet of aluminized steel between the bottom brick and the stand. Kiln comes with hard ceramic element holders, protected thermocouples, and solid peephole plugs. 22" Wide x 22" Deep x 18" High (5 cubic feet). High Power Elements to compensate for just having two sections. 3" K23 brick. Direct power connection. C-MET-us listed in the USA & Canada. Cone 10 all voltages.

Furniture Kit for XB2318 & e2318-XT

Part Number:
H-X-K318/00
Includes: Four 20" X 10" Rectangular Shelves (3/4" thick), Six Each 1/2", 1", 2", 4", 6", and 8" Square Posts, and One Pair Heat Resistant Gloves
Price:
$415.00

Insulation:
3" K23 Firebrick
Sections:
Two 9" high sections
Inside Dimensions:
22.00"
Wide x
22.00"
Deep x
18.00"
High (55.88 cm Wide x 55.88 cm Deep x 45.72 cm High)
Outside Dimensions:
43.00"
Wide x
41.00"
Deep x
74.00"
High (109.22 cm Wide x 104.14 cm Deep x 187.96 cm High)
Weight:
455
lbs (206 kg)

SKU	Model Number	Watts	Volts	Phase	Fuse Size
K-X-2318/21	XB2318-D-208-1Ph	8,936	208	Single Phase	60 Amp
Additional Information Amps: 43 Wire Connection: NEMA 6-50 1 Phase Plug with six foot cord. Neutral is not used. (Kiln may be direct wired without affecting the MET listing) Wire Gauge for Connection: 6 Ga Branch Fusing: Branch Fused Element Wiring: Parallel Max Temperature: Cone 10, 2350F, 1290C Certifications International: Made for all markets except EU CE: Not CE certified UL499: c-MET-us listed to UL499 Standards in the US and Canada Wiring Diagram(s):
K-X-2318/22	XB2318-D-208-3Ph	8,936	208	Three Phase (Delta)	50 Amp
Additional Information Amps: 37.2 Wire Connection: Direct Wire Connection (no cord) Wire Gauge for Connection: 6 Ga Branch Fusing: Branch Fused Element Wiring: Parallel Max Temperature: Cone 10, 2350F, 1290C Certifications International: Made for all markets except EU CE: Not CE certified UL499: c-MET-us listed to UL499 Standards in the US and Canada Wiring Diagram(s):
K-X-2318/31	XB2318-D-240-1Ph	8,936	240	Single Phase	50 Amp
Additional Information Amps: 37.2 Wire Connection: NEMA 6-50 1 Phase Plug with six foot cord. Neutral is not used. (Kiln may be direct wired without affecting the MET listing) Wire Gauge for Connection: 6 Ga Branch Fusing: Branch Fused Element Wiring: Parallel Max Temperature: Cone 10, 2350F, 1290C Certifications International: Made for all markets except EU CE: Not CE certified UL499: c-MET-us listed to UL499 Standards in the US and Canada Wiring Diagram(s):
K-X-2318/41	XB2318-D-220-1Ph	8,936	220-230	Single Phase	60 Amp
Additional Information Amps: 40.6 Wire Connection: Direct Wire Connection (no cord) Wire Gauge for Connection: 6 Ga Branch Fusing: Branch Fused Element Wiring: Parallel Max Temperature: Cone 10, 2350F, 1290C Certifications International: Made for all markets except EU CE: Not CE certified UL499: c-MET-us listed to UL499 Standards in the US and Canada Wiring Diagram(s):
K-X-2318/32	XB2318-D-240-3Ph	8,936	240	Three Phase (Delta)	50 Amp
Additional Information Amps: 32.2 Wire Connection: Direct Wire Connection (no cord) Wire Gauge for Connection: 6 Ga Branch Fusing: Branch Fused Element Wiring: Parallel Max Temperature: Cone 10, 2350F, 1290C Certifications International: Made for all markets except EU CE: Not CE certified UL499: c-MET-us listed to UL499 Standards in the US and Canada Wiring Diagram(s):
K-X-2318/62	XB2318-D-480-3Ph	8,936	460-480	Three Phase (Delta)	10 Amp
Additional Information Amps: 10.8 Wire Connection: Direct Wire Connection (no cord) Wire Gauge for Connection: 14 Ga Branch Fusing: Branch Fused Element Wiring: Three Elements in Wye with 277 Volts per element Max Temperature: Cone 10, 2350F, 1290C Certifications International: Made for all markets except EU CE: Not CE certified UL499: c-MET-us listed to UL499 Standards in the US and Canada Wiring Diagram(s):
K-X-231N/62	XB2318-D-480-3Ph-QD	8,936	460-480	Three Phase (Delta)	25 Amp
Additional Information Amps: 16.1 Wire Connection: Direct Wire Connection (no cord) Wire Gauge for Connection: 12 Ga Branch Fusing: Branch Fused Element Wiring: Two 240V Quad Elements in Series Max Temperature: Cone 10, 2350F, 1290C Certifications International: Made for all markets except EU CE: Not CE certified UL499: c-MET-us listed to UL499 Standards in the US and Canada Wiring Diagram(s):
K-X-2318/52	XB2318-D-380-3PY	8,936	380	Three Phase (Wye)	30 Amp
Additional Information Amps: 20.3 Wire Connection: Direct Wire Connection (no cord) Wire Gauge for Connection: 10 Ga Branch Fusing: Branch Fused Element Wiring: Parallel Max Temperature: Cone 10, 2350F, 1290C Certifications International: Made for all markets except EU CE: Not CE certified UL499: c-MET-us listed to UL499 Standards in the US and Canada Wiring Diagram(s):
K-X-2318/82	XB2318-D-400-3PY	8,936	400	Three Phase (Wye)	25 Amp
Additional Information Amps: 19.4 Wire Connection: Direct Wire Connection (no cord) Wire Gauge for Connection: 12 Ga Branch Fusing: Branch Fused Element Wiring: Parallel Max Temperature: Cone 10, 2350F, 1290C Certifications International: Made for all markets except EU CE: Not CE certified UL499: c-MET-us listed to UL499 Standards in the US and Canada Wiring Diagram(s):
K-X-2318/72	XB2318-D-415-3PY	8,936	415	Three Phase (Wye)	25 Amp
Additional Information Amps: 18.6 Wire Connection: Direct Wire Connection (no cord) Wire Gauge for Connection: 12 Ga Branch Fusing: Branch Fused Element Wiring: Parallel Max Temperature: Cone 10, 2350F, 1290C Certifications International: Made for all markets except EU CE: Not CE certified UL499: c-MET-us listed to UL499 Standards in the US and Canada Wiring Diagram(s):

Control

DynaTrol Multi-Program Zone Control

DynaTrol with 4 Easy-Fire programs (Slow Bisque, Fast Bisque, Slow Glaze, Fast Glaze), 6 custom programs, PreHeat, Delay, Program, Segment Review, and Diagnostics. Zone control included on most kilns. Also see Genesis Touch Screen Option with Phone App for Remote Monitoring.

Automatic Zone Control

No need to pay extra for this important feature! Zone control on an electric kiln gives you the utmost in controllable temperature uniformity. The kiln control separately measures temperatures in the bottom, middle and top of the ceramic kiln and automatically adjusts the heat output of three kiln zones during the entire glaze or bisque firing.

Industrial Wiring (DaVinci & Easy-Load)

DaVinci Panels are wired to industrial standards with good clean wire layout.

Floor-Standing Panel Away from Kiln (DaVinci)

The control panel is mounted on a stand away form the kiln.

Protected Thermocouples

Ceramic protection tubes protect the end of the thermocouple.

Heavy-Duty Type K Thermocouples

Thick 8 gauge thermocouples last a long time. Special Limit of Error to ANSI MC96.1 specifications is used.

Mercury Free Contactors

Power Relays are mercury-free to comply with increasing regulation and concern about mercury. Solid State Contactors are available as an option on most L&L Kilns.

On-Off Switch and Panel Fuse

All L&L Kilns come with an on-off switch and panel mounted control fuse. We do not rely on the kiln control to keep the kiln off.

Durability

Hard Ceramic Element Holders Make L&L Kilns More Durable

Durability, Repairability, Better Heat Transfer. The smooth, hard surface of the inside ceramic channel allows the elements to expand and contract freely. No pins! The dense ceramic holders extend element life because they do not insulate the hot elements from the kiln interior.

Strong Arched Sides with Extra Airspace (DaVinci)

Arched sides on DaVinci kilns are very strong and promote good air circulation

Steel Frame Supports Lid (DaVinci)

A unique welded rigid frame supports the entire lid on a DaVinci kiln.

Welded Angle Iron Stand (DaVinci)

Welded heavy-duty stand supports heavy loads. Alumized top sheet reflects heat.

Molded Ceramic Element Connections

Industrial grade ceramic terminal blocks make changing elements easy. All contact between elements and wire lugs is over a wide surface of heavily torqued stainless steel washers. Wires are not crimped to element ends as in some other brands. This means you can change elements yourself without buying an expensive tool or hiring a kiln repair person.

Solid Wide-View Peephole Plugs

Solid large non-tapered peepholes allow a wider view into the kiln. The peephole plugs are made from solid ceramic and are not as fragile as hollow type plugs used on competitor's kilns.

Proprietary Reflective Coating Hardens & Seals Brick

Special brick coating hardens and seals brick for durability and cleaner operation.

Corrosion Resistant Case

Corrosion resistant materials and methods result in a long-lasting kiln.

Extra Case Clamps

Three case clamps per 9" high kiln section are redundant safety for your L&L kiln.

Performance

Thermal Ceramics Firebrick

K23 firebrick combines good insulation with strength

Ease of Use

Spring-Loaded Lid For Easy Opening and Gentle Closing of DaVinci

Even the largest DaVinci lids can easily be lifted by one person.

Serviceability

Sectional Kiln Construction for DaVinci Kilns

Sectional kiln construction make DaVinci kilns easy to move, set up and disassemble for maintenance. Kiln Sections all plug into a separate control panel making the kiln easy to take apart and reconfigure.

Reversible Bottoms

The bottom can be easily reversed in case of a firing mishap.

Support

Three-Year Limited Warranty (Standard)

Most L&L Kilns have a three-year limited warranty.

Superior Technical Support

The combined experience at L&L Kilns in kilns, ceramics, electrical engineering and process engineering is unsurpassed. We work as a team to help you get you answers and help.

Visual Detailed Instruction Manual

The combined experience at L&L Kilns in kilns, ceramics, electrical engineering and process engineering is unsurpassed. We provide a visual parts list with photographs, part numbers, prices and helpful information to reduce confusion when ordering parts. We also include well-vetted information and wisdom from our industry partners to ensure our customers have access to all the basic information necessary to be successful from the first firing.

Safety

Listed to UL499 Standard by MET

Most L&L kilns are MET listed to UL499 standards. Listed kilns include Easy-Fire Pottery Kilns, Easy-Fire-XT Square Pottery Kilns, eQad-Pro Professional Kilns, eFL Front-Loading Kilns, Jupiter Sectional Kilns, DaVinci Square & Rectangular Production Kilns, School-Master School Kilns, Fuego Home Craft Kilns, Doll-Test Kilns, and Liberty-Belle Craft Kilns. Easy-Load Production Front-Loading kilns are MET-Us Listed for US only.

Elements

Quad Element Option

The combination of 1/2" diameter element coils, the doubled surface area of the Quad element design, and superior heat transfer of L&L's patented ceramic element holders, make this the best element system in the world today.

APM Sintered Powder Metal Elements

APM elements increase element life in difficult applications

Thermocouples

Type S Platinum Thermocouples

Type S Platinum Thermocouples are recommended for high fire applications. NOTE: Price of upgrade is per each thermocouple.

Pyrocil Metal Sheathed Industrial Thermocouples

Pyrocil thermocouples are sensitive but limited to about 2200°F but offer greater sensitivity to temperature change and so may be appropriate in applications below 2200°F that require sensitivity. NOTE: Price of upgrade is per each thermocouple.

Vents

Vent-Sure Downdraft Kiln Vent System

A Critical component in the longevity of your kiln!The Vent-Sure automatic kiln vent helps prevent corrosion on the inside and outside of your kiln.

Vent Control Programmed on DynaTrol & Genesis

The Vent Control allows you to automatically control the operation of the Vent-Sure kiln vent with one of the outputs from the DynaTrol (or Genesis).

Kiln Furniture

Furniture Kits

Kiln furniture kits are the recommended set of ceramic shelves, posts and kiln wash that go with each kiln model. These are for loading the work in the kiln.

Safety Gloves

These safety gloves are perfect for handling hot work when unloading a kiln.

Controls

Genesis Touch Screen Control

The new Genesis control from Bartlett includes a touch screen interface and WIFI connectivity added to the proven software of the DynaTrol. A phone app allows you to monitor your kiln remotely.

Solid State Relays

Solid State Relays are quiet and result in longer element life because the switching time is so fast the elements don’t heat and cool as much the way the will with regular mechanical contactors. The whole system includes heat sinks, special fast acting fuses, cooling fan and extra safety relays.

Electronic High Limit Back Up Control

Electronic High Limit Back Up Control acts as an upper limit back up to the main control. Back up contactors are also available.

KISS Computer Interface & Datalogger for DynaTrol Control

Control, monitor and record data for up to 10 kilns from your computer for a one-time price.

Eurotherm Three Zone Industrial Computer Control

The Eurotherm 2604 is an industrial-grade PID control with two or three zone capability built in.

Power

480 Volt Option

L&L's 480 volt option can include a NEMA 1 control panel

120 Volt Power Supply & Electrical Noise Filter For Automatic Kilns

This option helps protect your control from electrical noise

Powered Bottoms For DaVinci Kilns

Powered bottoms increase power and can aid uniformity in large kilns

Miscellaneous

Unpowered 4-1/2" High DaVinci Sections

Unpowered rings can extend the height of our DaVinci kilns.

Seismic Kiln Rack and Brace

This special Seismic Kiln Rack and Brace is designed to prevent a kiln from falling over during an earthquake.

Export & Special Crating Options

Export crates, ISPM-15 Skids for export, and special pallet designs for unloading Easy-fire kilns without a forklift.

Kiln:
Skid #1: 44 IN Wide X 48 IN Deep X 34 IN High | Skid #2: 45 IN Wide X 48 IN Deep X 84 IN High
(
Skid #1: 112 CM Wide X 122 CM Deep X 87 CM High | Skid #2: 115 CM Wide X 122 CM Deep X 214 CM High
)
Ship Weight:
555
lbs (252 kg)
Kiln with Furniture Kit:
Skid #1: 44 IN Wide X 48 IN Deep X 46 IN High | Skid #2: 45 IN Wide X 48 IN Deep X 84 IN High
(
Skid #1: 112 CM Wide X 122 CM Deep X 117 CM High | Skid #2: 115 CM Wide X 122 CM Deep X 214 CM High
)
Ship Weight:
610
lbs (277 kg)
Kiln with Vent:
Skid #1: 44 IN Wide X 48 IN Deep X 46 IN High | Skid #2: 45 IN Wide X 48 IN Deep X 84 IN High
(
Skid #1: 112 CM Wide X 122 CM Deep X 117 CM High | Skid #2: 115 CM Wide X 122 CM Deep X 214 CM High
)
Ship Weight:
570
lbs (259 kg)
Kiln with Vent and Furniture Kit:
Skid #1: 44 IN Wide X 48 IN Deep X 46 IN High | Skid #2: 45 IN Wide X 48 IN Deep X 84 IN High
(
Skid #1: 112 CM Wide X 122 CM Deep X 117 CM High | Skid #2: 115 CM Wide X 122 CM Deep X 214 CM High
)
Ship Weight:
625
lbs (283 kg)
Packaging:
Two Wooden Crates

Turntable View

Compare L&L Kilns


Kiln	e23T-3 Pottery Kiln	eQ2327-3 Production Kiln	SM23T-3 School Kiln	EL2424-H Front-Loading Kiln
Description	Flagship Multi-Purpose Kiln	Production Pottery Kiln	School Kiln with Intuitive Control	Industrial Grade Front-Loader
Price	$3,525.00	$4,475.00	$3,425.00	$9,900.00
Type	Polygonal Kilns	Polygonal Kilns	Polygonal Kilns	Front-Loading Kilns
Volume	6.7 cubic feet	6.7 cubic feet	6.7 cubic feet	8.0 cubic feet
Temperature	Cone 10, 2350F, 1290C	Cone 10, 2350F, 1290C	Cone 6, 2230F, 1220C	Cone 10, 2350F, 1290C