KILN SERIES:
Doll/Test Kilns
KILN:
DLH11-DXB Test Kiln

Doll & Test Kiln with One-Touch Control

KILN:
DLH11-DXB Test Kiln

Doll & Test Kiln with One-Touch Control

$1,275
LEAD TIME: 3 to 4 Weeks
BUY NOW
PDF Brochure General Dimension Diagram

Model DLH11-DXB Doll/Test Kiln with a One-Touch™ Control. Kiln comes with hard ceramic element holders, protected thermocouple, strong solid-top stand, and solid peephole plug. 11" Diam x 9" High (0.5 cu ft). 2-1/2" K23 brick. High Volts - 208, 220 and 240 volt versions. Cone 10 all voltages. Includes NEMA 6-20 plug. C-MET-us listed in the USA & Canada.

Furniture Kit for Doll/Test Kilns
  • Part Number:
    H-D-KDHL/00
  • Includes: Two 9" Full Round Shelves (3/8" thick) and Four each of 1/2", 1", 1-1/2", 2", 3", & 4" High 1" Triangular Ceramic Posts
  • Price:
    $140.00
  • Insulation:
    2-1/2" K23 Firebrick
  • Sections:
    One section
  • Inside Dimensions:
    11.00"
    Diameter x
    9.00"
    High (27.94 cm Diameter x 22.86 cm High)
  • Outside Dimensions:
    24.00"
    Wide x
    21.00"
    Deep x
    40.00"
    High (60.96 cm Wide x 53.34 cm Deep x 101.6 cm High)
  • Weight:
    95
    lbs (43 kg)
SKU Model Number Watts Volts Phase Fuse Size
K-D-DLHB/21 DLH11-DXB-208-1Ph 2,800 208 Single Phase 20 Amp
  • Additional Information
  • Amps: 13.5
  • Wire Connection: 5-20P Plug
  • Wire Gauge for Connection: 14 Ga
  • Branch Fusing: Not Branch Fused
  • Element Wiring: Series
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-D-DLHB/41 DLH11-DXB-220-1Ph 2,800 220-230 Single Phase 20 Amp
  • Additional Information
  • Amps: 12.7
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 14 Ga
  • Branch Fusing: Not Branch Fused
  • Element Wiring: Series
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-D-DLHB/31 DLH11-DXB-240-1Ph 2,800 240 Single Phase 10 Amp
  • Additional Information
  • Amps: 11.7
  • Wire Connection: 5-20P Plug
  • Wire Gauge for Connection: 14 Ga
  • Branch Fusing: Not Branch Fused
  • Element Wiring: Series
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):

Control

One-Touch™ Intuitive Kiln Control (School-Master, Liberty-Belle, Doll)
Four-Key Control that Redefines Simplicity • Perfect for Schools & Hobbyists
Protected Thermocouples
Ceramic protection tubes protect the end of the thermocouple.
Heavy-Duty Type K Thermocouples
Thick 8 gauge thermocouples last a long time. Special Limit of Error to ANSI MC96.1 specifications is used.
Mercury Free Contactors
Power Relays are mercury-free to comply with increasing regulation and concern about mercury. Solid State Contactors are available as an option on most L&L Kilns.
On-Off Switch and Panel Fuse
All L&L Kilns come with an on-off switch and panel mounted control fuse. We do not rely on the kiln control to keep the kiln off.

Durability

Hard Ceramic Element Holders Make L&L Kilns More Durable
Durability, Repairability, Better Heat Transfer. The smooth, hard surface of the inside ceramic channel allows the elements to expand and contract freely. No pins! The dense ceramic holders extend element life because they do not insulate the hot elements from the kiln interior.
Solid Wide-View Peephole Plugs
Solid large non-tapered peepholes allow a wider view into the kiln. The peephole plugs are made from solid ceramic and are not as fragile as hollow type plugs used on competitor's kilns.
Solid Super-Strong Aluminized Steel Stand
Aluminized stands are extremely strong and corrosion resistant. They offer solid support under the kiln - unlike spot-welded angle stands that are common in the industry.
Molded Ceramic Element Connections
Industrial grade ceramic terminal blocks make changing elements easy. All contact between elements and wire lugs is over a wide surface of heavily torqued stainless steel washers. Wires are not crimped to element ends as in some other brands. This means you can change elements yourself without buying an expensive tool or hiring a kiln repair person.
Proprietary Reflective Coating Hardens & Seals Brick
Special brick coating hardens and seals brick for durability and cleaner operation.
Stainless Clips Secure Lids to Bands
Stainless Steel clips help the lid stay secure and durable. This extra step ensures that the lid won't slip out of the stainless steel band.
Corrosion Resistant Case
Corrosion resistant materials and methods result in a long-lasting kiln.
Extra Case Clamps
Three case clamps per 9" high kiln section are redundant safety for your L&L kiln.

Performance

Thermal Ceramics Firebrick
K23 firebrick combines good insulation with strength

Serviceability

Reversible Bottoms
The bottom can be easily reversed in case of a firing mishap.

Ease of Use

Simple Strong Hinge with Wide-Angle Opening
This is used on top-loading kilns that are 8 sided or less

Support

Three-Year Limited Warranty (Standard)
Most L&L Kilns have a three-year limited warranty.
Superior Technical Support
The combined experience at L&L Kilns in kilns, ceramics, electrical engineering and process engineering is unsurpassed. We work as a team to help you get you answers and help.
Visual Detailed Instruction Manual
The combined experience at L&L Kilns in kilns, ceramics, electrical engineering and process engineering is unsurpassed. We provide a visual parts list with photographs, part numbers, prices and helpful information to reduce confusion when ordering parts. We also include well-vetted information and wisdom from our industry partners to ensure our customers have access to all the basic information necessary to be successful from the first firing.

Elements

APM Sintered Powder Metal Elements
APM elements increase element life in difficult applications

Thermocouples

Type S Platinum Thermocouples
Type S Platinum Thermocouples are recommended for high fire applications. NOTE: Price of upgrade is per each thermocouple.
Pyrocil Metal Sheathed Industrial Thermocouples
Pyrocil thermocouples are sensitive but limited to about 2200°F but offer greater sensitivity to temperature change and so may be appropriate in applications below 2200°F that require sensitivity. NOTE: Price of upgrade is per each thermocouple.

Kiln Furniture

Furniture Kits
Kiln furniture kits are the recommended set of ceramic shelves, posts and kiln wash that go with each kiln model. These are for loading the work in the kiln.
Safety Gloves
These safety gloves are perfect for handling hot work when unloading a kiln.
  • Kiln:
    30 IN Wide X 30 IN Deep X 28 IN High
    (
    77 CM Wide X 77 CM Deep X 72 CM High
    )
  • Ship Weight:
    145
    lbs (66 kg)
  • Kiln with Furniture Kit:
    30 IN Wide X 30 IN Deep X 34 IN High
    (
    77 CM Wide X 77 CM Deep X 87 CM High
    )
  • Ship Weight:
    155
    lbs (70 kg)
  • Kiln with Vent:
    30 IN Wide X 30 IN Deep X 34 IN High
    (
    77 CM Wide X 77 CM Deep X 87 CM High
    )
  • Ship Weight:
    160
    lbs (73 kg)
  • Kiln with Vent and Furniture Kit:
    30 IN Wide X 30 IN Deep X 39 IN High
    (
    77 CM Wide X 77 CM Deep X 100 CM High
    )
  • Ship Weight:
    170
    lbs (77 kg)
  • Packaging:
    Skidded Carton with Foam-in-Place packaging

Turntable View

DLH11-DXB Test Kiln
Comparison Kilns
F1418 (USA) Craft Kiln LB18 Craft Kiln LB18-3 Craft Kiln e18S-3 Pottery Kiln
Kiln F1418 (USA) Craft Kiln LB18 Hobby Kiln LB18-3 Hobby Kiln e18S-3 Pottery Kiln
Description

Home Craft Kiln

Craft Kiln Plugs into Dryer Outlet

Craft Kiln Plugs into Dryer Outlet

Flagship Multi-Purpose Kiln
Price $1,650.00 $1,900.00 $1,950.00 $2,150.00
Type Polygonal Kilns, Craft & Test Kilns Polygonal Kilns, Craft & Test Kilns Polygonal Kilns, Craft & Test Kilns Polygonal Kilns
Volume 1.5 cubic feet 2.5 cubic feet 2.5 cubic feet 2.5 cubic feet
Temperature Cone 10, 2350F, 1290C Cone 10, 2350F, 1290C Cone 10, 2350F, 1290C Cone 10, 2350F, 1290C