Easy-Load Kilns

Easy-Load Cut-Away

The Easy-Load front loading kilns are designed for easy loading and even heating in a heavy-duty construction. They feature 3" of firebrick backed up with 2" of mineral wool, Cone 10 operation, DynaTrol program control with three-zone control, ceramic element holders, elements on the door, back and sides, full arched roof construction with extra-strong K25 brick, beefy hinge system, door switch, plug door, gasketed door, integrated stand, optional Orton kiln sitter back-up and a complete selection of sizes up to 25 cubic feet.

See this page for Front-Loader Shipping Quote Form

See this page for Front-Loader Installation Checklist

Crating Options

There are three different crating options.

  1. If you will have a forklift available for unloading the kiln then the kiln comes on a pallet and is boxed for shipping by air ride trucking. This is standard and there is no charge for this.
  2. If you will not have a forklift available for unloading then a special engineered skid is constructed to allow you to remove the kiln from the skid with just a pallet jack. There is an extra cost for this.
  3. If the kiln is crated for export it is encased in marine grade plywood suitable for ISPM-15. There is an extra charge for this.

 

$9,900
Medium (8.0 cubic feet)
Front-Loading
Cone 10, 2350F, 1290C
DynaTrol Zone Control
$10,850
Medium-Large (9.0 cubic feet)
Front-Loading
Cone 10, 2350F, 1290C
DynaTrol Zone Control
$15,925
Medium-Large (12.0 cubic feet)
Front-Loading
Cone 10, 2350F, 1290C
DynaTrol Zone Control
$19,425
Large (16.0 cubic feet)
Front-Loading
Cone 10, 2350F, 1290C
DynaTrol Zone Control
$20,850
Large (20.0 cubic feet)
Front-Loading
Cone 10, 2350F, 1290C
DynaTrol Zone Control
$24,150
Large (25.0 cubic feet)
Front-Loading
Cone 10, 2350F, 1290C
DynaTrol Zone Control