Vent-Control for Vent-Sure
The vent control allows you to automatically control the operation of the Vent-Sure kiln vent with one of the outputs from the DynaTrol.
- It consists of a relay that is controlled from output #4 on the DynaTrol.
- There is a femalE 120 volt recepticale to plug the vent into and a cord to plug into a 120 volt wall outlet.
- Physical construction varies by model number.
Where it can be used
- It is only available for kilns with DynaTrols.
- It may not be used with kilns with powered bottoms (because the same output on the control is used)