Instructions

warning: Creating default object from empty value in /home/hotkilns/public_html/modules/taxonomy/taxonomy.pages.inc on line 33.

How to Unpack and Assembly an Easy-fire Kilns

Category: 
Assembly
Thumbnail: 
Teaser Text: 
How to unpack and assemble an Easy-fire kiln. Also eQuad-Pro, School-Master and others.
Relationships

These instructions are in two separate videos:

How to handle power interruptions, blackouts, and bad electrical power grids

In some places the electrical power is very inconsistent with power outages, interruptions, blackouts, voltage spikes, voltage drops, or excessive environmental line noise (such as is caused by lar

How to fire very precisely using witness cones

Automatic kilns and even manual kilns shut off by the use of cones are never as accurate as the human eye. 99.999% of time this is fine.

Should I use the Fast Glaze or Slow Glaze or Fast Bisque or Slow Bisque?

When in doubt it is almost always better to fire slower than faster.

A slower firing allows for more time for water vapor, fumes and gasses to escape from the body of the clay body.

How to add soak or change temperature to a 3-Button Bartlett Control or Custom Programs in the ONe-Touch Control during a firing

Add Time to Hold Period

Available only during a hold period. This option allows you to add time in 5 minute increments to a hold (soak) period.

How to add soak to or reprogram a DynaTrol during a firing

Change of Program During Firing: When firing you can alter the program anytime. You must press START/STOP, then reprogram, then press “Start”.

How to add soak to or reprogram a DynaTrol during a firing

Change of Program During Firing: When firing you can alter the program anytime. You must press START/STOP, then reprogram, then press “Start”.

Syndicate content