Electrical

warning: Creating default object from empty value in /home/hotkilns/public_html/modules/taxonomy/taxonomy.pages.inc on line 33.

Changing Phase on an Easy-Fire Kiln (Video)

Category: 
Repair & Diagnose Controls and Power
Thumbnail: 
Video: 
Teaser Text: 
This video shows how to change the transformer on most L&L automatic kilns
Relationships

This video shows how to change phase on an L&L Easy-Fire kiln. It will similar on most other L&L kilns with power cords.

What is Branch Fusing and where is it used?

Branch Fusing Included On High Powered Units

  • According to the the National electrical Code electrical equipment needs branch fusing when the total amperage draw is higher than 48 amps.

How to handle power interruptions, blackouts, and bad electrical power grids

In some places the electrical power is very inconsistent with power outages, interruptions, blackouts, voltage spikes, voltage drops, or excessive environmental line noise (such as is caused by lar

Can I get a 30 amp plug on an e18S or e18S-3?

The e18S and e18S-3 have an amperage draw of 23.9 amps. It is possible to supply this with a 30 amp plug.

Electrical Supply Problems and slow kiln performance

One of the most difficult kiln performance problems to address is a problem with the electrical supply to the kiln.

How to fix PF, E- P, E-P, ErrP Error

  1. The ErrP (PF, E- P, E-P in some older models) comes from a reset of the processor during a firing.

How do I keep elements from falling out of the element holders in the corner of a kiln?

  1. Sometimes with thick elements, especially in the corner of a DaVinci, Hercules or Easy-Load kiln, the elements will have a tendency to jump out or fall out of the corners. 
  2. We do
Syndicate content