• lnterior Dimensions: 25" Wide x 22" Deep x 28" High - 9 cubic feet
• Exterior Dimensions: 40" Wide x 34" Deep x 60" High (Approx). NOTE: The kiln can be moved through a 34-1/2" wide by 73" high door without removing the door. The integrated steel stand will accommodate a normal 27" wide pallet jack for moving the kiln in either direction.

ELECTRICAL & TEMPERATURE SPECIFICATIONS

• Maximum Temperature: Cone 10, 2350F, 1290C (limited by the control to Cone 6 withe the standard One-Touch control system - wihc also gives it the K12 5-Year warranty)
• 240 Volts: 16,500 Watts. 1 Phase Amps: 69.0 (Fuse for 90 amps). 3 Phase Amps: 39.9 (Fuse for 50 amps)
• 208 Volts: 14,750 Watts. 1 Phase Amps: 71.1 (Fuse for 90 amps). 3 Phase Amps: 41.1 (Fuse for 60 amps)
  

HEAVY-DUTY WELDED CASE AND STAND

• Tight Door: Single Pivot Plug door for tight seal with adjustable heavy-duty hinge support
• Strong Door Latches: Two Heavy-duty Door Latch Turn-downs
  Locking clasp: Door can be locked with a pad lock for safety in a classroom
• Heavy Gauge Welded Sheet Steel Case: A heavy gauge steel is important for long term corrosion resistance
  Integrated Welded Steel Stand: Carefully fabricated from structural square tubing members
• Powder Coated Finish: Tough Powder Coated Case for long-lasting finish.
• Steel Drawer: This neatly holds the furniture posts when not being used
• Steel Racks: These neatly and safely hold ceramic shelves when not being used

ROBUST ELEMENT SYSTEM

• Ceramic Element Holders: These protect the firebrick lining and elements - critical for long-term durability
• Heavy-Duty Elements: 13 or 14 gauge elements are evenly spaced on sides, back and door. (Note: it is critical to have elements on the door to achieve good uniformity in a front-loading kiln)
• 3 Separate Heating Zones: There are a total of 6 elements on 12 rows with 2 elements per zone

INSULATION SYSTEM

• Multi-layered insulation: 2-1/2" of firebrick plus 2" of backup mineral wool on sides, back, door and top. Kiln is relatively cool to touch (an important safety issue in a classroom)
• Solid 5" of firebrick on bottom: Solid support for heavy loads
• Flat "Dutch" Arch Roof Construction: Arched construction prevents collapsed roofs in a 24” wide span
• Door Plug: Door has an inset door plug that creates an effective heat lock around the door seal
• Woven Fiberglass Door Gasket: This increases the tightness of the door seal even more
• Reflective Brick Coating: Aids in brick liner durability by fusing and sealing surface of firebrick
  

ONE-TOUCH CONTROL SYSTEM

• Proprietary One-Touch™ Intuitive Kiln Control was designed for busy school teachers - One touch and you are ready to fire the bisque and glaze programs typically used in schools (also easy to adjust simple parameters like cone, delay, hold, heat-up and cool-down rates). You can even create four custom ramp/hold programs.
• Type K Thermocouples In Ceramic Protection Tubes: These will last longer that bare thermocouples and no metallic dust will get into your kiln (there is one for each zone)

SAFETY FEATURES

• Circuit Fuses: All three element circuits are separately fused for safety
• On-Off Switch: Also included is a Panel-Mounted Control Fuse
• No Mercury: Mechanical Power Contactors are used for safety
• Door Power Shut-Off Switch: This turns power off to elements when door is open for safety
• LISTED TO UL499 STANDARDS
  Note: This can be very important for schools, universities, other public institutions and some businesses.

INCLUDED ACCESSORIES

• Manual Inlet Damper on Bottom and Top Plug: This is great for fast cooling
• Full 1" Diameter Peepholes: Three (one for each zone) with Solid Ceramic Plugs located at the top of the door

OPTIONAL ACCESSORIES

• Powered Vent-Sure Downdraft Vent System: For even firing and fume removal
• High Alumina Shelves and Cordierite Posts included: Strong, warp-resistant shelves. Includes (8) 10" by 22" by 3/4" shelves, (6) each of 1", 2", 1", 2", 4", 6", and 8" square posts, and safety heat gloves.
• Type S Platinum Thermocouples
• Three-zone DynaTrol: changes maximum temperature to Cone 10 and changes warranty to our standard 3-year warranty.
  
  .

The world-class Renaissance kiln is made together with our European partner. It has some unique features such as the system for storing shelves and posts to keep a classroom neat, the unique manual venting system for quicker cooling, and the door clasp for locking the door. We recommend this kiln for K12 school classrooms.

Renaissance kilns also include hard ceramic element holders, heavy-duty elements (including elements on the door), DynaTrol three zone program control, Type K thermocouples with protection tubes, solid strong three-segment arched roof, and cool-to-touch case. Fits through a 34-1/2” door!

Listed to UL499 Standards.