|
|
|
| EASY-FIRE "FLAGSHIP" TOP-LOADING KILN |
 |
|
OUR FLAGSHIP PRODUCT: 24-Key DynaTrol with Dynamic Zone Control (two zones for “S” models and three zones for “T” models) • Type K 8 gauge thermocouples with ceramic protection tubes • Piggy-back control panel with drop-down front panel for easy maintenance • Full support 14 gauge aluminized steel stand • Solid peephole plugs with full 1” view (no tapering) • Hard ceramic element holders • Proprietary reflective brick coating that protects brick and keeps dusting down • “Easy-Lift, Easy-Load” stainless steel spring hinge system with full-support when door is up and tilted back (there are no support bars to get in the way of loading) (Spring hinge not available on e18S & e18T models) • Mercury-free relays • Plugs on all USA models (6-50 on single phase and 15-50 on three phase) • c-MET-us listed to UL499 standards • Three-year Limited Warranty
[Click here for Models] [Click here for Features] [Go to Top]
|
| . |
|
|
| SCHOOL-MASTER K-12 SCHOOL KILNS |
 |
|
DESIGNED FOR K-12 SCHOOLS WITH SPECIAL FIVE-YEAR LIMITED WARRANTY. Proprietary One-Touch™ Intuitive Kiln Control is designed for busy school teachers - One touch and you are ready to fire the bisque and glaze programs typically used in schools (also easy to adjust simple parameters like cone, delay, hold, heat-up and cool-down rates). You can even create four custom ramp/hold programs. • Type K 8 gauge thermocouple with protection tube • Single zone with graded elements • Full support 14 gauge aluminized steel stand • Three solid peephole plugs with full 1” view (no tapering) • Hard ceramic element holders • Proprietary reflective brick coating that protects brick and keeps dusting down • “Easy-Lift, Easy-Load” stainless steel spring hinge system with full-support when door is up and tilted back (there are no support bars to get in the way of loading) • Mercury-free relays • Plugs on all USA models (6-50 on single phase and 15-50 on three phase)
[Click here for Models and Features] [Go to Top]
|
| . |
|
|
| RENAISSANCE K-12 SCHOOL FRONT LOADING KILN |
 |
|
A 8.5 CUBIC FOOT FRONT LOADING DESIGNED FOR K-12 SCHOOLS WITH SPECIAL FIVE-YEAR LIMITED WARRANTY. Handheld One-Touch™ Intuitive Kiln Control • Adjustable door • Plug door seal with fiberglass gasket • Strong three-segment arched roof • Unique manual vent with slider/damper for faster cool-down • Door clasp to allow door to be locked while firing • 2-1/2” of firebrick with 2” of highly insulating mineral wool as back up • 5” solid firebrick on bottom • Heavy gauge solid steel welded case with integrated stand • Drawer & rack for kiln furniture integrated into stand • Solid peephole plugs with full 1” view (no tapering) in the door • Hard ceramic element holders • Type K thermocouples with protection tubes • Branch fusing in control panel • Door power safety shut-off switch is standard • Elements on back, sides and door (standard) • Mercury-free relays • Direct wired • MET-us listed to UL499 standards • The kiln will fit through a 34-1/2” wide door without disassembly or removal of door
[Click here for Information] [Go to Top] |
| .. |
|
|
| JUPITER POLYGONAL CUSTOMIZABLE TOP-LOADING KILNS |
 |
|
BUILT TO ORDER: Jupiter Polygonal sectional kilns come in 10 sizes from 2.6 cubic feet to 17.2 cubic feet. They are available in 3 basic crossections from 18" high to 45" high. 2-1/2" or 3" firebrick. Standard or heavy-duty elements. Manual or automatic. Customize these kilns with a wide variety of options • Type K 8 gauge thermocouples with ceramic protection tubes on automatic vrsions • Separate control box with plug-in sections • Full support 14 gauge aluminized steel stand • Solid peephole plugs with full 1” view (no tapering) • “Easy-Lift, Easy-Load” stainless steel spring hinge system with full-support when door is up and tilted back (there are no support bars to get in the way of loading) is standard on all 12 and 10 sided models (29”, 28”, 22” and 23” diameter), Not available on the 8 sided (17-1/2” and 16-1/2” diameter models) • c-MET-us listed to UL499 standards • Three-year Limited Warranty
[Click here for Models] [Click here for Features] [Go to Top] |
| .. |
|
|
| .eQUAD-PRO PRODUCTION KILNS |
 |
|
QUAD ELEMENT SYSTEM FOR HEAVY-DUTY FIRING: 24-Key DynaTrol with Dynamic Zone Control • 3” brick • Quad element system (fours rows of super heavy gauge elements per 9” high section) • Extra power with branch fusing for high production work • Type K 8 gauge thermocouples with ceramic protection tubes • Full support 14 gauge aluminized steel stand • Solid peephole plugs with full 1” view (no tapering) • Hard ceramic element holders • Proprietary reflective brick coating that protects brick and keeps dusting down • “Easy-Lift, Easy-Load” stainless steel spring hinge system with full-support when door is up and tilted back (there are no support bars to get in the way of loading) • Mercury-free relays • Direct wired • MET-us listing to UL499 standards is pending • Three-year Limited Warranty
[Click here for Models and Features] [Go to Top]
|
| .. |
|
|
| JH SERIES CRYSALLINE GLAZE CONE 12 KILNS |
 |
|
SPECIALLY DESIGNED FOR CRYSTALLINE GLAZE FIRING: These kilns will reach 2400°F (cone 12) • Includes 2-1/2” of K25 2500°F firebrick of sides and bottom with a 3” thick top • Approximately 25% more power than the base models • Quad element holder system with super heavy-duty elements • Type S platinum thermocouples • 24-Key DynaTrol dynamic zone control • Other features that are standard on the base models • Three-year Limited Warranty
[Click here for Models and Features] [Go to Top] |
| .. |
|
|
| .HERCULES MEDIUM-SIZED FRONT LOADING KILNS |
 |
|
AN 8 CUBIC FOOT FRONT LOADING KILNS: Adjustable door • Plug seal with gasket • Heavy 12 gauge welded case with separate but attached stand • Leveling pads • Extra-tough K25 2500°F 4-1/2” firebrick arch • Other insulation is 3” of K23 brick with 2” of mineral wool backup insulation • Elements on door, sides and back • 24-Key DynaTrol with Dynamic Zone Control • Type K 8 gauge thermocouples with ceramic protection tubes • Control panel mounted with air space between it and the case • Branch fusing in control • Two solid peephole plugs with full 1” view (no tapering) in the door • Hard ceramic element holders • Proprietary reflective brick coating that protects brick and keeps dusting down • Door power safety shut-off switch • Direct wire • Mercury-free relays • MET-us listed to UL499 standards • The kiln will fit through a 34-1/2” wide door without disassembly or removal of door .
[Click here for Models and Features] [Go to Top] |
| . |
|
|
| EASY-LOAD LARGE FRONT LOADING KILNS |
. |
|
FRONT LOADING KILNS 12 TO 25 CUBIC FEET: Adjustable door • Massive hinge for stability of door • Plug seal with gasket • Heavy 10 gauge welded case with integrated stand • Extra-tough K25 2500°F 4-1/2” firebrick arch • Other insulation is 3” of K23 brick with 2” of mineral wool backup insulation • Elements on door, sides and back • 24-Key DynaTrol with Dynamic Zone Control • Type K 8 gauge thermocouples with ceramic protection tubes • Control panel mounted with air space between it and the case • Branch fusing in control • Three solid peephole plugs with full 1” view (no tapering) in the door • Hard ceramic element holders • Proprietary reflective brick coating that protects brick and keeps dusting down • Door power safety shut-off switch • Direct wire • Mercury-free relays • MET-us listed to UL499 standards.
[Click here for Models] [Go to Top] |
| . |
|
|
| DAVINCI SQUARE & RECTANGULAR TOP-LOADING KILNS |
 |
|
PREMIUM PRODUCTION KILNS: Counterbalanced Lid with springs inside of tubes • Welded angle-iron stand and hinge system • 3” brick with all brick construction (including lid) • Strong arched sides with extra space added to interior dimensions for good air circulation • Solid peephole plugs with full 1” view (no tapering) • Floor mounted control panel (except for X2300 series) • Branch fusing in control panel • 24-Key DynaTrol with Dynamic Zone Control • Type K 8 gauge thermocouples with ceramic protection tubes • Control mounted in a handheld box with 4’ cord • Solid peephole plugs with full 1” view (no tapering) • Hard ceramic element holders • Direct wired • Mercury-free relays • c-MET-us listed to UL499 standards • Three-year Limited Warranty
[Click here for Models] [Click here for Features] [Go to Top] |
| . |
|
|
| DAVINCI BELL-LIFT KILNS |
 |
|
EASY TO LOAD PRODUCTION KILNS: DaVinci Bell-Lift kilns are sometimes less expensive than Front-Loading kilns and offer other advantages such as easier loading and better uniformity. They are available on the X3200 Series (30-1/2 square) and T3400 series (30-1/2" x 43-1/2 rectangular).
[Click here for more information] [Go to Top] |
| .. |
|
|
| LARGE FORMAT 100 CUBIC FOOT INDUSTRIAL BELL-LIFT KILNS |
 |
|
MODELS UP TO 100 CUBIC FEET: L&L Kiln Mfg., Inc. announces the development of a line of large industrial-grade Bell-Lift kilns designed for industrial ceramics and other industrial applications. The first model is 100 cubic feet (66” wide by 47” deep by 54” high). Larger and smaller models can be built. The kiln reaches 2350°F (1290°C or cone 10).
[Click here for more information] [Go to Top] |
| .. |
|
|
| DURA-FIRE SIMPLE DURABLE MANUAL KILNS |
 |
|
THE ULTIMATE IN DURABILITY: Orton Kiln Sitter with Timer backup mounted in external box • Hi-Medium-Low Switches for each section • Full support 14 gauge aluminized steel stand • Solid peephole plugs • Hard ceramic element holders • Proprietary reflective brick coating that protects brick and keeps dusting down • “Easy-Lift, Easy Load” Spring Hinge is standard on the D28S & D28T, optional on the D23S & D23T and not available on the D18 & D18T models. 6-50 plugs on all USA models. Single phase only. Mercury-free. Not listed to UL499. Vent-Sure is optional. Three-year Limited Warranty.. [Click here for Models] [Go to Top] |
| .. |
|
|
| DOLL / TEST 120 VOLT TEST KILNS |
 |
|
USE ANYWHERE: top-loading test kilns come in one size only: 11" diameter by 9" high. Typically they work on 120 volts, although a version is available for 200-240 volts. They are available in either 15 amp Cone 8 version or a 18 amp Cone 10 version. • Proprietary One-Touch™ Intuitive Kiln Control • Type K 8 gauge thermocouple with ceramic protection tube on automatic version • Full support 14 gauge aluminized steel stand • Solid peephole plug • Hard ceramic element holders • Proprietary reflective brick coating that protects brick and keeps dusting down • Not UL499 listed • Three-year Limited Warranty. [Click here for Models] [Go to Top] |
| . |
|
|
| LIBERTY-BELLE HOME & STUDIO TEST KILN |
 |
|
THE PERFECT STARTER KILN: Proprietary One-Touch™ Intuitive Kiln Control. One touch and you are ready to fire the most common bisque and glaze programs. (also easy to adjust simple parameters like cone, delay, hold, heat-up and cool-down rates). You can even create four custom ramp/hold programs • 12 foot long cord with Nema 14-30 dryer type plug • Full support 14 gauge aluminized steel stand • Solid peephole plugs • Hard ceramic element holders • Proprietary reflective brick coating that protects brick and keeps dusting down • Mercury-free relays • Three-year Limited Warranty. [Click here for Information] [Go to Top] |
| . |
|
|
| VENT-SURE SUPER-SAFE VENT SYSTEM |
 |
|
THE BEST DOWNDRAFT VENT: The Vent-Sure Downdraft Kiln Vent System is designed to be "super safe" and long lasting as well as effective in venting your kiln properly. The blower is mounted on the wall which means the fumes are vented under vacuum instead of pressure - insuring venting even if there is a leak in your vent duct.
[Click here for Information] [Go to Top] |
| .. |
|
|
| TRU-VIEW MULTI-THERMOCOUPLE PYROMETER |
 |
|
THE PERFECT ACCESSORY FOR MANUAL KILNS: The Tru-View multi-thermocouple DIGITAL pyrometer system allows you to see what is happening in your manual kiln WHILE it is firing so that you can make fine adjustments to even out the temperature gradients before reaching maturing temperatures.
[Click here for Information] [Go to Top] |
| .. |
|
|
| ACCESSORIES & KILN FURNITURE FOR YOUR KILN |
 |
|
L&L sells kiln shelves, ceramic posts, protective safety glasses, insulated gloves, loading ladders, kiln wash, brick repair kits and books to help you fire your kiln properly. [Click here for all Accessories] [Go to Top] |
|
|
|
