Manual Venting System for Cooling Front-Loading Kilns

Vent in the Roof and Inlets in the bottom with a damper

  • The cooling vent outlet is a 3" by 1.5" plug in the center of the roof that can be removed by hand.

Brick plug for top

  • A slide damper opens three 1" diamter holes in the bottom of the kiln to let air in for cooling. 
  • NOTE: This is for cooling purposes and does not replace the Vent-Sure automatic kiln vent.

Inlet holes with damper


Extra Images

Manual Venting System for Cooling Front-Loading Kilns