3" OF PREMIUM FIREBRICK BACKED UP WITH 2" OF MINERAL WOOL
- Hot enough to fire stoneware and porcelain.
HEAVY-DUTY WELDED 10 GAUGE STEEL CASE
- Tough Powder Coated Case for long-lasting finish
PLUG DOOR FOR TIGHT SEAL
- Tadpole gasket around door seals the door very tight
- Door is adjustible
- Solid Heavy-Duty Hinge with thrust bearings.
- Positive strong door latches.
DYNA-GLOW CERAMIC ELEMENT HOLDERS
- Protect Firebrick - Result in Much Longer Kiln Life.
ALL MODELS RATED TO CONE 10 - 2350F - 1287C
- This extra insulation saves energy and provides for slower cool-down
- The sides and back are K23 firebrick
- The arch is 4-1/2" of K25 firebrick (which is extra-strong).
BRICK HARDENED WITH SPECIAL COATING & HARDENER
- The special coating hardens just the surface of the brick which helps prevent dusting.
- The shallow cut required by the unique L&L Dyna-Glow element holders makes brick even more energy efficient.
DYNATROL AUTOMATIC CONTROL
- Operation of the kiln, including zone control for even firing, is completely automated.
- There are four easy-to-use "Easy-Fire" ceramic programs.
- There are six user defined programs for more sophisticated firing.
DYNAMIC ZONE CONTROL
- Dynamic Zone Control automatically controls a top, middle and bottom zone for accuracy better than 1/2 cone top to bottom.
- There are seperate thermocouples for each zone.
- Mercury-Free mechanical contactors are used to control power to the elements.
THERMOCOUPLES ARE HEAVY-DUTY 8 GAUGE AND INCLUDE INDUSTRIAL THERMOCOUPLE PROTECTION TUBES
- Type S Thermocouples are optional.
ELEMENTS
- All Elements in Kiln Have the Same Resistance
- Elements are Evenly Coiled Heavy-Duty Elements
- There are elements on the door.
LARGE 1" DIAMETER PEEPHOLES
- Peepholes are a full one inch diameter and are not tapered.
- There is one for each zone.
BUILT TO LAST - EASY TO MAINTAIN
- L&L kilns are designed from the ground up to be easy to maintain yourself with no special tools.
- Dyna-Glow element holders and simple industrial grade element terminations make changing elements the easiest of any kiln.
SERVICE AND QUALITY WITH A THREE YEAR WARRANTY
- Ask anyone about L&L's unsurpassed 65 year reputation for service and quality products.
- We ship most parts from the factory in less than two days.
- Call us, email us or visit the extensive support section on our web site.
- We maintain a fully staffed service department with 800 number factory technical service. If you have questions we have answers.
DETACHABLE PANEL
- The control panel is mounted on the side of the kiln with an air space inbetween it and the kiln.
- Panel is ventilated
- Control, contactors and sensitive components last longer.
- Panel is removable for factory service
- The panel hinges open for easy servicing.
- All wiring is neatly laid out for easy maintenance.
- Wires are color coded and numbered.
ON/OFF SWITCH & CONTROL FUSE
OPTIONAL POWER VENT-SURE KILN VENT
OPTIONAL TYPE S THERMOCOUPLES
OPTIONAL ORTON KILN-SITTER BACK UP SAFETY SYSTEM
LISTED TO UL499 STANDARDS
Note: This can be very important for schools, universities, other public institutions and some businesses.
|
