PRICE: $3950

OPTIONS

Angle Iron Stand: $525

Vent-Sure Vent System: $440
Mounted to the top of the kiln

CONTACT OUR SISTER COMPANY, L&L SPECIAL FURNACE CO., INC. FOR INFORMATION: 610-459-9216 OR sales@hotfurnace.com.

SPECIFICATIONS

INTERIOR DIMENSIONS:

• 17" wide by 12" high by 14.5" deep
• (43.2 cm wide by 30.5 cm high by 36.8 cm deep)
  
• 1.74 cubic feet (.048 cubic meters)
• Note: with hearth plate there is 10" from top of hearth to top of chamber

EXTERIOR DIMENSIONS:

• 19" wide by 19" high by 23" deep
  
• (48 cm wide by 48 cm high by 58 cm deep)
  

SHIPPING DIMENSIONS:

• 44" wide by 40" high by 40" deep
  
• (91 cm wide by 76 cm high by 91 cm deep)
  

SHIP WEIGHT: 475 lbs, 215 KG

MAX TEMP: 2350°F - 1287°C-CONE 10

200 to 240 VOLT OPERATION

• Plugs into a standard 30 amp dryer outlet (14-30R Receptical)

AMPS & WATTS

• At 240 volts: 6000 watts, 25.0 amps
• At 220 volts: 5042 watts, 22.9 amps
• At 208 volts: 4507 watts, 21.7 amps
• At 200 volts: 4167 watts, 20.9 amps

FEATURES

DYNA-GLOW ELEMENT HOLDERS

• Provide easier maintenance and more efficient firing of the kiln
• Helps prevent dusting
• Elements won't fall out of roof
• No pins

DYNATROL PROGRAM CONTROL INCLUDED

• 6 programs with 8 segments each (2 programs can be linked for a total of 16 segments).

INDUSTRIAL THERMOCOUPLE

ELEMENTS ON TOP, BOTTOM AND SIDES RESULTS IN TIGHT GRADIENT UNIFORMITY

• A nine point temperature uniformity survey demonstrated better than +/- 7-1/2°F (a total variation of 15°F) from corner to corner in the chamber from 500°F to 2000°F.

FAST HEAT-UP

• Heats up to 2100°F in less than one hour at 240 volts
• Heats up to 2100°F in less than 2-1/2 hours at 208 volts.

COUNTERBALANCED VERTICAL DOOR

• Lift easily with one hand.
• Air-cooled handle stays cool to touch.

SLOT IN DOOR

• There is a 1-1/2" wide by 2-1/2" high slot in the bottom of the door.
• You can work through the slot while opening and closing the door. Includes removable insulated plug with a handle.
• The slot is approximately 3/4" above the hearth plate.

BENCH MOUNTED ON HEAVY DUTY BASE

• The case is constructed of welded heavy gauge steel.
• The case is painted with a tough, baked-on epoxy powder coating.

FOUR LIFTING HANDLES

• Makes moving easy.
• Two people can pick up kiln.

CERAMIC HEARTH PLATE INCLUDED

• Comes with 1/2" high ceramic standoffs.
• Hearth is 16" wide by 13" deep.
• Extra shelves are $55 each.

COATED HARDENED FIREBRICK REDUCES DUSTING

• We coat our firebrick with a proprietary reflective ceramic coating which penetrates, binds and hardens the surface of the entire interior of the kiln.

FIREBRICK & BACK-UP MULTI-LAYERED INSULATION

• 3" firebrick on top (for extra strength)
• 2-1/2" on other surfaces.
• Brick is backed up with 2" of mineral wool.
• It only takes about 850 watts to maintain temperature at 2000°F.
• Back up insulation keeps case relatively cool to touch.

MULTI-VOLTAGE MAKES IT EASY TO HOOK UP

• Furnace will operate on any single phase voltage from 200 volts to 240 volts, 50 Hz or 60 Hz. Truly a universal kiln/furnace.

DOOR CUT OFF LIMIT SWITCH

• Turns power off when door opens.

ON/OFF TOGGLE SWITCH AND CONTROL FUSE

POWER PLUG INCLUDED

• 30 amp NEMA 14-30 four-prong plug with ground and neutral (typical dryer cord). Neutral is not used.

ADVANCED FOAM-IN-PLACE PACKAGING

• Packed in a protective skidded carton with advanced foam-in-place packaging for trouble-free common carrier shipment.

NOTE: This kiln is not UL listed.

[Go to Top]