Click on image to enlarge
DLH11-DX Test Kiln
More images
Furniture Kit
H-D-KDHL/00 ($135.00)
Two 9" Full Round Shelves (3/8" thick), Four each of 1/2", 1", 1-1/2", 2", 3", & 4" High 1" Triangular Ceramic Posts,
Questions? Quote?
Send an email to sales@hotkilns.com or
call 800-750-8350.
call 800-750-8350.
DLH11-DX Test Kiln
Model DLH11-DX Doll/Test Kiln with a DynaTrol Controller. Kiln comes with hard ceramic element holders, thermocouple protection tube, strong solid-top stand, and solid peephole plug. 11" Diam x 9" High (0.5 cu ft). 2-1/2" K23 brick. , High Volts (208, 220 and 240 volt versions available). Includes NEMA 6-20 plug. Cone 10 all voltages. (Not listed to UL499)
$1400
2-1/2" (63 mm) K23 Premium Firebrick
Top-Loading
One section
6 sides
0.5 cubic ft (14 Liters)
105 pounds (47 Kg)
11" Diam x 9" High
19" Wide x 25" Deep x 22" High
48.3 cm Wide x 63.5 cm Deep x 55.9 cm High
48.3 cm Wide x 63.5 cm Deep x 55.9 cm High
Part Number
Watts
Volts
Phase
Fuse Size
K-D-DLHD/31
2800 W
240 V
Single Phase
20 Amp
Maximum Temperature
- Max TemperatureCone 10, 2350F, 1290C
Additional Electrical Information
- Amps11.7
- Max TemperatureCone 10, 2350F, 1290C
- Wire Connection6-20P Plug
- Wire Ga for Connection14 Ga
- Branch FusingNo
Certifications and Markets
- InternationalMade for USA market only
- CENot CE certified
- UL499Not listed to UL499
[sell_price]
K-D-DLHD/21
2800 W
208 V
Single Phase
20 Amp
Maximum Temperature
- Max TemperatureCone 10, 2350F, 1290C
Additional Electrical Information
- Amps13.5
- Max TemperatureCone 10, 2350F, 1290C
- Wire Connection6-20P Plug
- Wire Ga for Connection14 Ga
- Branch FusingNo
Certifications and Markets
- InternationalMade for USA market only
- CENot CE certified
- UL499Not listed to UL499
[sell_price]
K-D-DLHD/41
2800 W
220-230 V
Single Phase
20 Amp
Maximum Temperature
- Max TemperatureCone 10, 2350F, 1290C
Additional Electrical Information
- Amps12.7
- Max TemperatureCone 10, 2350F, 1290C
- Wire Connection6-20P Plug
- Wire Ga for Connection14 Ga
- Branch FusingNo
Certifications and Markets
- InternationalMade for non-USA markets only
- CENot CE certified
- UL499Not listed to UL499
[sell_price]
One 9” high section sits on a bottom. The kiln is very easy to assemble and disassemble.
Stainless steel wrapped around shaped firebrick. There are three adjustable clamps welded to each casing. All assembly is with stainless steel screws. The kiln sections sit on a separate stand.
Simple strong hinge with chain for door support
Heavy-duty 14 gauge full solid stand with multiple bends for strength. Legs bolt on with heavy 1/4-20 stainless bolts. The metal is aluminized for good corrosion resistance.
A proprietary brick coating is applied to all interior surfaces of the kiln. This is put on before the element holders are inserted. This coating penetrates the firebrick and fuses the surface on a microscopic level which helps prevent dusting and crumbling of the fragile firebrick.
One solid ceramic peephole plug with full 1” diameter.
Single Zone.
8 Ga Type K Exposed Thermocouple in Mullite Protection Tube (4.5" long /114mm)
Mounted on control panel
All controls and components are mounted in a separate control panel that is mounted to the element connection boxes with an air space in between. The control panel is hinged for easy access and maintenance. Each kiln section plugs into the control box. Control box can be easily removed for servicing. On/off switch and control fuse are included. More about Jupiter plug-in control panel.
Controls are mounted in a removable box.
Durability
Performance
Ease of Use
Support
Safety
Elements
Thermocouples
Vents
Kiln Furniture
Controls
36" Wide x 36" Deep x 25" High
91 cm Wide x 91 cm Deep x 63 cm High
91 cm Wide x 91 cm Deep x 63 cm High
36" Wide x 36" Deep x 25" High
91 cm Wide x 91 cm Deep x 63 cm High
91 cm Wide x 91 cm Deep x 63 cm High
N/A
N/A
N/A
N/A
N/A
N/A
110 lbs (50 kg)
+ Kit 130 lbs (59 kg)
+ Vent lbs ( kg)
+ Kit + Vent 110 lbs ( kg)
Skidded Carton with Foam-in-Place packaging
